Part Description Price Buy |
Volume Pricing We offer volume pricing on Sprague products as follows: 1-3 units = List price 4-9 units = - 3% 10-24 units = -5% >24 = call for quote. List pricing will show when placing your order but the discount will be applied when we process the order. |
Liquid Module Repair Kits for PowerStar 4 |
Comments |
Serial Number Note: For all pumps with a ratio of 34:1 or greater you must check your Serial number before ordering kits. If the Serial number is 400 or higher (made after September 2000) order the kits above ending in -1. Otherwise, for older pumps, order the kits directly to the left (lighter color background,). |
Part Description Price Buy |
Complete Liquid Modules for PowerStar 4 |
Comments |
Part Description Price Buy |
Separation Kits for PowerStar 4 |
Comments |
You can replace the complete liquid side of your pump by ordering the module you need to the left (you will use your existing air module with this new liquid module). If you just want parts to rebuild your existing liquid module, then order a repair kit (above). |
Part Description Price Buy |
Air Module Rebuild Kits for PowerStar 4 |
Comments |
You can buy a complete replacement air module for your pump or just a rebuild kit to repair your existing module. |
Use a separation kit to modify your existing pump to the separated version or to rebuild your separation seal. |
Kits to the left contain the parts need to rebuild the liquid side of a single ended P4 Series pump. If you have a double ended pump you will need (2) kits, assuming you intend to rebuild both sides. If you prefer to replace the whole fluid unit of your pump, then order a complete Liquid Module (below). To rebuild the air side of the pump order an Air Module Repair Kit (below). |
Part Description Price Buy |
Accessories for PowerStar 4 |
Comments |
The Air Control Kit is an air preparation unit used to filter the compressed air coming to the unit and to regulate the pressure. It consists of a filter, regulator, gauge and shut-off valve. |
The Fluid Control Kit is for the high pressure outlet side of the liquid module. It consists of a manifold, gauge and bleed valve and is used to determine/regulate fluid outlet pressure. |
Available on this page: Repair Kits (to rebuild either the air side or the liquid side of your pump), complete Air Modules or Liquid Modules (to completely replace either side of your pump), Separation Kits, Air Control Kits, and Fluid Control Kits. If you want to rebuild your complete pump then order both an Air Module Repair Kit and a Liquid Module Repair Kit. Order (2) liquid kits if you have a double ended pump and are rebuilding both sides. |
Sprague P4 Parts & Accessories |